Wood grab is the application of hydraulic press drive to implement clamping, transport work, generally in the mountain top, farms and other areas to use. There are a lot of wood grabbers, all based on long-term technical professional needs to carry out modification, after modification, the adaptability of the object transport is stronger, the efficiency will be greatly improved, and the coefficient can also show a stronger guarantee. The application of the wood grab requires strict construction site management, to ensure that the construction site of large and medium-sized industrial equipment installation, application of the whole process of job responsibilities, standard multi-party production and personal behavior, to avoid and reduce production accidents.
The application of mechanical equipment is the mutual effect of several system software, and the problem of a certain part will jeopardize the overall operating efficiency.
The following inventory analysis is done for the common fault conditions of the climbing machine:
See whether the amount of gear oil is standardized, whether the filter element is blocked, whether the type of cooking oil is in line with the regulations, if some kind of non-compliance with the regulations, first to deal with. Then, check whether the water temperature in the whole process of the work is too high, if too high, you should check the gear oil heat pipe cooling system software, find the reason and remove. Measure the pressure of the weak member in the work, and compare with the index value to distinguish.
After the common fault components are found, it is not necessary to arbitrarily replace the new parts, because some components are not damaged, and can still be used again after cleaning; Some still have repair value and can be used again after repair. Therefore, it should be noted that there is no need to urgently repair in fault detection, and it is necessary to take into account whether the root cause of common faults is indeed cleared due to repair.
In addition to removing its reasons and disassembling parts, it is also necessary to fully consider that every part of the system software, even the car fuel tank, is a metal material slag. If it is not fully cleaned, it may result in the re-destruction of the equipment. Therefore, before the repair, it is necessary to completely clean the hydraulic transmission system, the car fuel tank and remove the gear oil and the filter element.
If there is a common fault or abnormal phenomenon in the application of the wood grab machine, it should be stopped first, and after removing the common faults and hidden dangers, it can be delivered again. If we carefully improve process management and strengthen management according to production laws and regulations, policies and regulations and relevant requirements, we can ensure the application of large and medium-sized construction lifting equipment on construction sites, and reasonably avoid and reduce the occurrence of production accidents.
Previous:The new car crane folding arm and straight arm which is good
Next:Wheel grab in rainy weather need to pay attention to what |
Return list |